The Control Box is a device necessary for the operation of the SSH heater or a set of heaters, just like an external thermostat or a thermostat with a programmer.

The Control Box is used to change the operating mode of the heater or a set of Dania SSH system stationary heaters.
It is a switch adapted to the selection of heating power

• position “1/2” – half power
• position “1/1” – full power

fan mode

• “FAN” position – fan mode

or turning off the heater

• position “0” heater disabled

The Control Box can control the operation of a single heater or a group of up to 6 heaters. The set can, depending on the needs, consist of both heaters of the same power and heaters of different power. To control SSH heaters, a programmable thermostat (product 88650253) should also be used, which will ensure that the desired temperature is maintained and allow you to change the heating program (night / day; weekend; frost protection program).